SPT WA-1420H Use and Care Manual download pdf (Page 9)

OPERATING INSTRUCTIONS

Fig.4

Other features

After the unit has stopped (or powered off), there

will be a 3-minute delay before unit will start up

again. This is to protect the compressor. Operation

will automatically resume after 3 minutes.

Wait 3 minutes before resuming operation

SLEEP operation

If the unit breaks off unexpectedly due to

power cut, it will restart at previous function

when the power resumes.

Auto-Restart

The louver can be adjusted automatically (Fig. 4):

- When unit powers ON, the louver opens fully.

- Press the SWING button on the panel or

remote controller to initiate the Auto swing

feature. The louver will automatically swing

up and down.

- Press SWING button again at desired angle

for set air flow.

- Please do not adjust the louver manually.

Air flow direction adjustment

Swing automatically

- If unit is running in COOL mode when SLEEP

function is activated, unit will automatically

increase set temperature by 1°C/2°F after 30

minutes. After another 30 minutes, unit will

again increase temperature by 1°C/2°F.

- If unit is running in HEAT mode (heating

models only) when SLEEP function is

activated, unit will automatically decrease set

temperature by 1°C/2°F after 30 minutes. After

another 30 minutes, unit will again decrease

temperature by 1°C/2°F.

- Unit will maintain the new temperature for 7

hours, then returns to original set temperature.

This ends the Sleep function and unit will

continue to operate as originally programmed.

Note: This feature is unavailable under FAN or

DRY mode

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 22 23

No comments

SPT WA-1420H Use and Care Manual Page 9