SPT WA-1420H Use and Care Manual download pdf (Page 21)

Swing operation

Use the SWING button to adjust the Up/Down airflow direction.

1. When the button is quickly pressed once, the louver is adjusted by 6°.

Keep pressing the button to adjust louver to desired angle.

2. Press and hold for 2 seconds to activate/deactivate auto-swing function.

NOTE: When the louver swings to a position which would affect the cooling

(or heating) of the unit, it would automatically change the swing direction.

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

SWING

TIMER ON

ECONOMY

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( C)

LED

DISPLAY

HANDLING THE REMOTE CONTROLLER

Timer operation

To set the Auto-on timer:

1. Press the TIMER ON button and remote will display TIMER ON. The last

auto-on setting and the signal “h” will also be displayed.

2. Press the TIMER ON button again to begin setting the desire time. Each

press of the button increases the time by 30-minutes, up to 10 hours.

Then by 1-hour increments, up to 24 hours.

To set the Auto-off timer:

1. Press the TIMER OFF button and remote will display TIMER OFF. The

last auto-off setting and the signal “h” will also be displayed.

2. Press the TIMER OFF button again to begin setting the desire time. Each

press of the button increases the time by 30-minutes, up to 10 hours.

Then by 1-hour increments, up to 24 hours.

After setting TIMER ON/OFF, there will be a one-half second delay before

the remote controller transmits the signal to the AC unit. The after another

2 seconds (approximately), the “h” signal will disappear and set temperature

will re-appear on the display window.

NOTE: Timer ON/OFF is limited to the following time settings: 0.5, 1.0, 1.5,

2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10,

11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24.

TEMP

AUTO

COOL

DRY

HEAT

FAN

HIGH

MED

LOW

MODE

FAN SPEED

SWING

TIMER ON

ECONOMY

ON/OFF

TIMER OFF

RESET LOCK

SET TEMPERATURE( C)

LED

DISPLAY

TIMER ON

Start

Off

6 hours later

Set

Examples of Timer setting

TIMER ON (auto-on operation)

The TIMER ON feature is useful when you want the unit to automatically

turn on, say before you return home from work.

Example:

To start the AC unit in 6 hours.

1. Press the TIMER ON button. Remote displays the last time setting and

the “h” signal.

2. Press the TIMER ON button repeatedly till “6:0h” is displayed on remote.

3. Wait for about 3 seconds and display will revert to show set temperature.

4. Auto-on function has been set.

1 2 ... 16 17 18 19 20 21 22 23

Comments to this Manuals

No comments

SPT WA-1420H Use and Care Manual Page 21

Comments to this Manuals

Related products and manuals for Mobile air conditioners SPT WA-1420H