SPT WC-1901US Use and Care Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
4
CONTROL PANEL
POWER
Once the appliance is plugged into a power outlet, unit powers on automatically.
Touch the Power button to turn off (or turn on) appliance.
Warning:
To avoid damage to the compressor, please do not turn on the appliance within 5 Minutes
after appliance was turned off.
INTERIOR LIGHTING
Touch the Light button to turn on (or turn off) the interior cool LED lighting.
The light will remain on until it is turned off.
TEMPERATURE SETTING
The temperature range can be set between 41 - 72°F (5 - 22°C).
Touch the
or
button to increase or decrease the set temperature. Each touch is in
increment of 1°F/1°C.
First touch of the
or
button will recall the previous set temperature in the display window.
If unit has experienced a power failure (or power unplugged), previous set temperature will
remain as the unit is equipped with memory function.
After 5 seconds of inactivity, the display will change to show cabinet’s internal temperature.
Notice:
During initial use or after appliance has been off for a long time, you may find a few degrees
variance between the set temperature and the displayed temperature. This is normal and the
appliance will be in order after a few hours.
TEMPERATURE DISPLAY WINDOW
Displays set temperature when setting the temperature and will change to display actual
internal temperature after 5 seconds of inactivity.
If display window shows “HH” or “LL” along with a continuous buzz, this means malfunction of
the temperature probe. The appliance is designed to run periodically to help keep the coldness
inside under such circumstance. However, set temperature may not be achieved and to avoid
destroying your stored wines, it is strongly recommended to have the appliance repaired
immediately. Please contact Sunpentown at 1-800-330-0388.
SELECTING DISPLAY IN FAHRENHEIT (°F) OR CELSIUS (°C )
Touch the
button to change temperature display between Fahrenheit (°F) and Celsius (°C)
.
Power
Lighting
Temp increase
Display window
Temp decrease
°C or °F
interchange
Page view 4
1 2 3 4 5 6 7 8

Comments to this Manuals

No comments