SPT WA-1350DE Owner's Manual download pdf (Page 10)

INSTALLATION INSTRUCTIONS

Fig.1

Fig.2

Fig.3

Fig.4

Location

 The air conditioner should be placed on a firm

foundation to minimize noise and vibration. For

safe and secure positioning, place the unit on a

smooth, level floor strong enough to support the

unit.

 The unit has casters to aid placement, but it should

only be rolled on smooth and flat surfaces. Use

caution when rolling on carpet. Do not attempt to

roll the unit over objects.

 The unit must be placed within reach of a properly

rated grounded socket.

 Never place any obstacles around the air inlet or

outlet.

 Allow at least 30cm (approx 12 inches) of space

from the wall for efficient airflow. (Fig.1)

Window Kit Installation

Your window slider kit is designed to fit most standard

“vertical” and “horizontal” window applications.

However, it may be necessary for you to improvise or

modify some aspects of the installation procedures for

certain types of windows. Please refer to Fig.2 and

Fig.3 for minimum and maximum window openings.

Window slider kit can be fixed with a small bolt (Fig.4)

Note: If the window opening is less than the

mentioned minimum length of the window slider kit,

cut the piece with holes on its side to fit your window

opening. Do not cut the piece with the exhaust adapter

opening.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

No comments

SPT WA-1350DE Owner's Manual Page 10