SPT SD-72PE Owner's Manual Page 1

DEHUMIDIFIER with BUILT-IN PUMP MODELS: SD-52PE / SD-72PE INSTRUCTION MANUAL Please read these instructions thoroughly and keep it in a safe

9Fig.8 Fig.9 Fig.10 Fig.11  Make sure the connections are secure so there will be no leaks.  Direct the hose towards the drain, be sure there ar

10Fig.12 CARE AND MAINTENANCE Always turn the dehumidifier off and unplug from power source before cleaning. Clean the Grille and Housing • Use w

11TECHNICAL SPECIFICATIONS MODEL SD-52PE SD-72PE Moisture Removal ** 50 pints per day 70 pints per day Application Area 350 sq. ft. 550 sq. f

12 Your Guarantee If this product is found to be faulty as a result of faulty materials or workmanship within one year from date of purchase, it

1CONTENTS SAFETY PRECAUTUIONS…...……………………………………………………………2 ELECTRICAL INFORMATION .……………………………………………………………3 CONTROL PANEL ….……………………………………………………………

2BEFORE YOU USE YOUR DEHUMIDIFIER, PLEASE READ THIS INSTRUCTION MANUAL CAREFULLY. SAFETY PRECAUTIONS To prevent injury and property damage, the fo

3------------------------------------------ CAUTION --------------------------------------------------- 1. Do not use the unit in small spaces f

4CONTROL PANEL Control Buttons: whenever a button is pressed, the unit will make a beep sound to indicate that it is changing modes.  PUMP: Pre

5DISPLAY PANEL • Displays the set humidity level (from 35% to 85%) or auto-start/stop time (0-24) while setting, then returns to display actual roo

6o When the unit if off: press of the Timer button and the Timer-On indicator will illuminate (indicating auto-start is initiated). Press Timer but

7OPERATING THE UNIT Positioning the unit A dehumidifier will have little or no effect in drying an adjacent enclosed area, such as a closet, unless

8Fig.1 Fig.2 Fig.3 Fig.5 Fig.6 Fig.7 Removing collected water - There are three ways to remove collected water. 1. Use the bucket  If the unit is